dmesg - Intel Core i7-4510U
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.4.0-104-generic (buildd@lgw01-amd64-030) (gcc version 4.8.4 (Ubuntu 4.8.4-2ubuntu1~14.04.3) ) #127~14.04.1-Ubuntu SMP Mon Dec 11 12:44:15 UTC 2017 (Ubuntu 4.4.0-104.127~14.04.1-generic 4.4.98)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
x86/fpu: Using 'eager' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000094db9fff] usable
BIOS-e820: [mem 0x0000000094dba000-0x00000000956b9fff] ACPI NVS
BIOS-e820: [mem 0x00000000956ba000-0x000000009c89efff] usable
BIOS-e820: [mem 0x000000009c89f000-0x000000009cd8efff] reserved
BIOS-e820: [mem 0x000000009cd8f000-0x000000009ce8efff] ACPI NVS
BIOS-e820: [mem 0x000000009ce8f000-0x000000009cefefff] ACPI data
BIOS-e820: [mem 0x000000009ceff000-0x000000009cefffff] usable
BIOS-e820: [mem 0x000000009cf00000-0x000000009f9fffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000025f5fffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: TOSHIBA SATELLITE L50-B-1HM/Type2 - Board Product Name1, BIOS 2.00 12/11/2014
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x25f600 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-E7FFF write-protect
E8000-EFFFF write-combining
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask 7C00000000 write-back
1 base 009CF00000 mask 7FFFF00000 uncachable
2 base 009D000000 mask 7FFF000000 uncachable
3 base 009E000000 mask 7FFE000000 uncachable
4 base 00A0000000 mask 7FE0000000 uncachable
5 base 00C0000000 mask 7FC0000000 uncachable
6 disabled
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
original variable MTRRs
reg 0, base: 0GB, range: 16GB, type WB
reg 1, base: 2511MB, range: 1MB, type UC
reg 2, base: 2512MB, range: 16MB, type UC
reg 3, base: 2528MB, range: 32MB, type UC
reg 4, base: 2560MB, range: 512MB, type UC
reg 5, base: 3GB, range: 1GB, type UC
total RAM covered: 14799M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 64M num_reg: 7 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 512MB, type WB
reg 2, base: 2511MB, range: 1MB, type UC
reg 3, base: 2512MB, range: 16MB, type UC
reg 4, base: 2528MB, range: 32MB, type UC
reg 5, base: 4GB, range: 4GB, type WB
reg 6, base: 8GB, range: 8GB, type WB
e820: update [mem 0x9cf00000-0xffffffff] usable ==> reserved
e820: last_pfn = 0x9cf00 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000098000] 98000 size 24576
Using GB pages for direct mapping
BRK [0x02210000, 0x02210fff] PGTABLE
BRK [0x02211000, 0x02211fff] PGTABLE
BRK [0x02212000, 0x02212fff] PGTABLE
BRK [0x02213000, 0x02213fff] PGTABLE
BRK [0x02214000, 0x02214fff] PGTABLE
BRK [0x02215000, 0x02215fff] PGTABLE
RAMDISK: [mem 0x35538000-0x36a93fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000FE020 000024 (v02 TOSQCI)
ACPI: XSDT 0x000000009CECA188 0000D4 (v01 TOSQCI TOSQCI00 00000001 01000013)
ACPI: FACP 0x000000009CEF6000 00010C (v05 TOSQCI TOSQCI00 00000001 ACPI 00040000)
ACPI: DSDT 0x000000009CEDA000 015AE4 (v02 TOSQCI TOSQCI00 00000000 ACPI 00040000)
ACPI: FACS 0x000000009CE89000 000040
ACPI: UEFI 0x000000009CEFD000 000236 (v01 TOSQCI TOSQCI00 00000001 ACPI 00040000)
ACPI: UEFI 0x000000009CEFC000 000042 (v01 TOSQCI TOSQCI00 00000000 ACPI 00040000)
ACPI: MSDM 0x000000009CEFB000 000055 (v03 TOSQCI TOSQCI00 00000001 ACPI 00040000)
ACPI: ASF! 0x000000009CEFA000 0000A5 (v32 TOSQCI TOSQCI00 00000001 ACPI 00040000)
ACPI: ASPT 0x000000009CEF9000 000034 (v07 TOSQCI TOSQCI00 00000001 ACPI 00040000)
ACPI: BOOT 0x000000009CEF8000 000028 (v01 TOSQCI TOSQCI00 00000001 ACPI 00040000)
ACPI: DBGP 0x000000009CEF7000 000034 (v01 TOSQCI TOSQCI00 00000001 ACPI 00040000)
ACPI: HPET 0x000000009CEF5000 000038 (v01 TOSQCI TOSQCI00 00000001 ACPI 00040000)
ACPI: LPIT 0x000000009CEF4000 000094 (v01 TOSQCI TOSQCI00 00000001 ACPI 00040000)
ACPI: APIC 0x000000009CEF3000 00008C (v03 TOSQCI TOSQCI00 00000001 ACPI 00040000)
ACPI: MCFG 0x000000009CEF2000 00003C (v01 TOSQCI TOSQCI00 00000001 ACPI 00040000)
ACPI: SLIC 0x000000009CEF1000 000176 (v01 TOSQCI TOSQCI00 00000001 ACPI 00040000)
ACPI: WDAT 0x000000009CEF0000 000224 (v01 TOSQCI TOSQCI00 00000001 ACPI 00040000)
ACPI: SSDT 0x000000009CED7000 002E26 (v01 INSYDE HSW-LPT 00001000 ACPI 00040000)
ACPI: SSDT 0x000000009CED6000 000564 (v01 INSYDE HSW-LPT 00003000 ACPI 00040000)
ACPI: SSDT 0x000000009CED5000 000B74 (v01 INSYDE HSW-LPT 00003000 ACPI 00040000)
ACPI: SSDT 0x000000009CECF000 005C4C (v01 INSYDE HSW-LPT 00003000 ACPI 00040000)
ACPI: SSDT 0x000000009CECD000 001B4B (v01 INSYDE HSW-LPT 00001000 ACPI 00040000)
ACPI: CSRT 0x000000009CECC000 0000C4 (v01 TOSQCI TOSQCI00 00000001 ACPI 00040000)
ACPI: FPDT 0x000000009CECB000 000044 (v01 TOSQCI TOSQCI00 00000002 ACPI 00040000)
ACPI: WPBT 0x000000009CEC1000 000038 (v01 TOSQCI TOSQCI00 00000001 ABTW 20120402)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000025f5fffff]
NODE_DATA(0) allocated [mem 0x25f5f8000-0x25f5fcfff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000025f5fffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009dfff]
node 0: [mem 0x0000000000100000-0x0000000094db9fff]
node 0: [mem 0x00000000956ba000-0x000000009c89efff]
node 0: [mem 0x000000009ceff000-0x000000009cefffff]
node 0: [mem 0x0000000100000000-0x000000025f5fffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000025f5fffff]
On node 0 totalpages: 2078013
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 9919 pages used for memmap
DMA32 zone: 634784 pages, LIFO batch:31
Normal zone: 22488 pages used for memmap
Normal zone: 1439232 pages, LIFO batch:31
Reserving Intel graphics stolen memory at 0x9da00000-0x9f9fffff
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 8 CPUs, 4 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x94dba000-0x956b9fff]
PM: Registered nosave memory: [mem 0x9c89f000-0x9cd8efff]
PM: Registered nosave memory: [mem 0x9cd8f000-0x9ce8efff]
PM: Registered nosave memory: [mem 0x9ce8f000-0x9cefefff]
PM: Registered nosave memory: [mem 0x9cf00000-0x9f9fffff]
PM: Registered nosave memory: [mem 0x9fa00000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff]
PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xff9fffff]
PM: Registered nosave memory: [mem 0xffa00000-0xffffffff]
e820: [mem 0x9fa00000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 33 pages/cpu @ffff88025f200000 s98264 r8192 d28712 u262144
pcpu-alloc: s98264 r8192 d28712 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 2045521
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 8073112K/8312052K available (8272K kernel code, 1304K rwdata, 4004K rodata, 1492K init, 1316K bss, 238940K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
NR_IRQS:33024 nr_irqs:760 16
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2594.141 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5188.28 BogoMIPS (lpj=10376564)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150930
ACPI: 6 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
Initializing cgroup subsys io
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
Initializing cgroup subsys pids
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 7 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
Freeing SMP alternatives memory: 32K
ftrace: allocating 32187 entries in 126 pages
smpboot: APIC(0) Converting physical 0 to logical package 0
smpboot: Max logical packages: 4
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i7-4510U CPU @ 2.00GHz (family: 0x6, model: 0x45, stepping: 0x1)
Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
.... node #0, CPUs: #1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2 #3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (20753.12 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0x94dba000-0x956b9fff] (9437184 bytes)
PM: Registering ACPI NVS region [mem 0x9cd8f000-0x9ce8efff] (1048576 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 2048 (order: 5, 131072 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 23:57:09, date: 12/18/17
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
Simple Boot Flag at 0x44 set to 0x1
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 17 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880255692000 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20130117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8802555EA800 0005AA (v01 PmRef ApIst 00003000 INTL 20130117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8802555DF400 000119 (v01 PmRef ApCst 00003000 INTL 20130117)
ACPI : EC: EC started
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [PC05] (on)
acpi ABCD0000:00: ACPI dock station (docks/bays count: 1)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff window]
pci_bus 0000:00: root bus resource [bus 00-fe]
pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xb3000000-0xb33fffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0x6000-0x603f]
pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
pci 0000:00:03.0: reg 0x10: [mem 0xb3810000-0xb3813fff 64bit]
pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xb3800000-0xb380ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xb381b000-0xb381b01f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xb3814000-0xb3817fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:9c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:9c14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: [8086:9c16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:9c18] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xb3819000-0xb38193ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0x6088-0x608f]
pci 0000:00:1f.2: reg 0x14: [io 0x6094-0x6097]
pci 0000:00:1f.2: reg 0x18: [io 0x6080-0x6087]
pci 0000:00:1f.2: reg 0x1c: [io 0x6090-0x6093]
pci 0000:00:1f.2: reg 0x20: [io 0x6060-0x607f]
pci 0000:00:1f.2: reg 0x24: [mem 0xb3818000-0xb38187ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xb381a000-0xb381a0ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x6040-0x605f]
pci 0000:01:00.0: [10ec:5229] type 00 class 0xff0000
pci 0000:01:00.0: reg 0x10: [mem 0xb2000000-0xb2000fff]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D1 D2 D3hot
pci 0000:01:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: PCI bridge to [bus 01-06]
pci 0000:00:1c.0: bridge window [io 0x5000-0x5fff]
pci 0000:00:1c.0: bridge window [mem 0xb2000000-0xb2ffffff]
pci 0000:00:1c.0: bridge window [mem 0xb1000000-0xb1ffffff 64bit pref]
pci 0000:07:00.0: [8086:08b3] type 00 class 0x028000
pci 0000:07:00.0: reg 0x10: [mem 0xb3700000-0xb3701fff 64bit]
pci 0000:07:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PCI bridge to [bus 07]
pci 0000:00:1c.2: bridge window [mem 0xb3700000-0xb37fffff]
pci 0000:08:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:08:00.0: reg 0x10: [io 0x4000-0x40ff]
pci 0000:08:00.0: reg 0x18: [mem 0xb3600000-0xb3600fff 64bit]
pci 0000:08:00.0: reg 0x20: [mem 0xb3400000-0xb3403fff 64bit pref]
pci 0000:08:00.0: supports D1 D2
pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:08:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: PCI bridge to [bus 08]
pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.3: bridge window [mem 0xb3600000-0xb36fffff]
pci 0000:00:1c.3: bridge window [mem 0xb3400000-0xb34fffff 64bit pref]
pci 0000:09:00.0: [1002:6900] type 00 class 0x038000
pci 0000:09:00.0: reg 0x10: [mem 0xa0000000-0xafffffff 64bit pref]
pci 0000:09:00.0: reg 0x18: [mem 0xb0000000-0xb01fffff 64bit pref]
pci 0000:09:00.0: reg 0x20: [io 0x3000-0x30ff]
pci 0000:09:00.0: reg 0x24: [mem 0xb3500000-0xb353ffff]
pci 0000:09:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
pci 0000:09:00.0: supports D1 D2
pci 0000:09:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.4: PCI bridge to [bus 09]
pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.4: bridge window [mem 0xb3500000-0xb35fffff]
pci 0000:00:1c.4: bridge window [mem 0xa0000000-0xb01fffff 64bit pref]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *7
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *7
ACPI: Enabled 5 GPEs in block 00 to 7F
ACPI : EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
e820: reserve RAM buffer [mem 0x94dba000-0x97ffffff]
e820: reserve RAM buffer [mem 0x9c89f000-0x9fffffff]
e820: reserve RAM buffer [mem 0x9cf00000-0x9fffffff]
e820: reserve RAM buffer [mem 0x25f600000-0x25fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
amd_nb: Cannot enumerate AMD northbridges
clocksource: Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [io 0x0680-0x069f] has been reserved
system 00:00: [io 0xffff] has been reserved
system 00:00: [io 0xffff] has been reserved
system 00:00: [io 0xffff] has been reserved
system 00:00: [io 0x1800-0x18fe] could not be reserved
system 00:00: [io 0x164e-0x164f] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:02: [io 0x1854-0x1857] has been reserved
system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:03: Plug and Play ACPI device, IDs TOS1102 PNP0303 (active)
pnp 00:04: Plug and Play ACPI device, IDs TOS1151 PNP0f03 (active)
system 00:05: [mem 0xfe102000-0xfe102fff] has been reserved
system 00:05: [mem 0xfe104000-0xfe104fff] has been reserved
system 00:05: [mem 0xfe106000-0xfe106fff] has been reserved
system 00:05: [mem 0xfe10e000-0xfe10efff] has been reserved
system 00:05: [mem 0xfe112000-0xfe112fff] has been reserved
system 00:05: [mem 0xfe111000-0xfe111007] has been reserved
system 00:05: [mem 0xfe111014-0xfe111fff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:06: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:06: [mem 0xff000000-0xffffffff] could not be reserved
system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:06: [mem 0x9fa10000-0x9fa1ffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 7 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:09:00.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window
pci 0000:00:1c.0: PCI bridge to [bus 01-06]
pci 0000:00:1c.0: bridge window [io 0x5000-0x5fff]
pci 0000:00:1c.0: bridge window [mem 0xb2000000-0xb2ffffff]
pci 0000:00:1c.0: bridge window [mem 0xb1000000-0xb1ffffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 07]
pci 0000:00:1c.2: bridge window [mem 0xb3700000-0xb37fffff]
pci 0000:00:1c.3: PCI bridge to [bus 08]
pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.3: bridge window [mem 0xb3600000-0xb36fffff]
pci 0000:00:1c.3: bridge window [mem 0xb3400000-0xb34fffff 64bit pref]
pci 0000:09:00.0: BAR 6: assigned [mem 0xb3540000-0xb355ffff pref]
pci 0000:00:1c.4: PCI bridge to [bus 09]
pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.4: bridge window [mem 0xb3500000-0xb35fffff]
pci 0000:00:1c.4: bridge window [mem 0xa0000000-0xb01fffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x9fa00000-0xfeafffff window]
pci_bus 0000:01: resource 0 [io 0x5000-0x5fff]
pci_bus 0000:01: resource 1 [mem 0xb2000000-0xb2ffffff]
pci_bus 0000:01: resource 2 [mem 0xb1000000-0xb1ffffff 64bit pref]
pci_bus 0000:07: resource 1 [mem 0xb3700000-0xb37fffff]
pci_bus 0000:08: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:08: resource 1 [mem 0xb3600000-0xb36fffff]
pci_bus 0000:08: resource 2 [mem 0xb3400000-0xb34fffff 64bit pref]
pci_bus 0000:09: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:09: resource 1 [mem 0xb3500000-0xb35fffff]
pci_bus 0000:09: resource 2 [mem 0xa0000000-0xb01fffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM
pci 0000:00:14.0: can't derive routing for PCI INT A
pci 0000:00:14.0: PCI INT A: no GSI
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 21872K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x9889f000-0x9c89f000] (64MB) mapped at [ffff88009889f000-ffff88009c89efff]
RAPL PMU detected, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
hw unit of domain pp0-core 2^-14 Joules
hw unit of domain package 2^-14 Joules
hw unit of domain dram 2^-14 Joules
hw unit of domain pp1-gpu 2^-14 Joules
Scanning for low memory corruption every 60 seconds
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1513641429.644:1): initialized
Initialise system trusted keyring
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.23)
Key type big_key registered
Allocating IMA MOK and blacklist keyrings.
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
pci 0000:07:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
pci 0000:08:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
pci 0000:09:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp 0000:00:1c.0:pcie04: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1366x768x32, linelength=5504, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90001000000, using 4160k, total 4160k
Console: switching to colour frame buffer device 170x48
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x11142120
intel_idle: v0.4.1 model 0x45
intel_idle: lapic_timer_reliable_states 0xffffffff
ACPI: AC Adapter [ACAD] (on-line)
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
Linux agpgart interface v0.103
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xb3819000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.4.0-104-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A
xhci_hcd 0000:00:14.0: PCI INT A: no GSI
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0004b810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.4.0-104-generic xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 9 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.4.0-104-generic xhci-hcd
usb usb3: SerialNumber: 0000:00:14.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
usb: port power management may be unreliable
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
i8042: Detected active multiplexing controller, rev 1.1
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
Intel P-state driver initializing.
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
microcode: CPU0 sig=0x40651, pf=0x40, revision=0x1c
microcode: CPU1 sig=0x40651, pf=0x40, revision=0x1c
microcode: CPU2 sig=0x40651, pf=0x40, revision=0x1c
microcode: CPU3 sig=0x40651, pf=0x40, revision=0x1c
microcode: Microcode Update Driver: v2.01 , Peter Oruba
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 39ca7978d6f052f5b28b8e7f431e62b35d75cc93'
zswap: loaded using pool lzo/zbud
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
Magic number: 13:274:1010
rtc_cmos 00:01: setting system clock to 2017-12-18 23:57:11 UTC (1513641431)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 2-2: new low-speed USB device number 2 using xhci_hcd
usb 1-1: New USB device found, idVendor=8087, idProduct=8000
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 8 ports detected
[Firmware Bug]: battery: (dis)charge rate invalid.
ACPI: Battery Slot [BAT1] (battery present)
Freeing unused kernel memory: 1492K
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 1956K
Freeing unused kernel memory: 92K
systemd-udevd[121]: starting version 204
FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
rtsx_pci 0000:01:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 45
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
usb 2-2: New USB device found, idVendor=0581, idProduct=0101
usb 2-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 2-2: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
r8169 0000:08:00.0: can't disable ASPM; OS doesn't have ASPM control
ahci 0000:00:1f.2: version 3.0
r8169 0000:08:00.0 eth0: RTL8168g/8111g at 0xffffc90000cee000, c4:54:44:e4:5b:d4, XID 0c000800 IRQ 47
r8169 0000:08:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq led clo only pio slum part deso sadm sds apst
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
ata1: SATA max UDMA/133 abar m2048@0xb3818000 port 0xb3818100 irq 46
ata2: SATA max UDMA/133 abar m2048@0xb3818000 port 0xb3818180 irq 46
ata3: DUMMY
ata4: DUMMY
usb 2-6: new high-speed USB device number 3 using xhci_hcd
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ATAPI: TSSTcorp CDDVDW SU-208FB, TF01, max UDMA/100
ata2.00: configured for UDMA/100
ata1.00: ATA-8: TOSHIBA MQ01ABD075, AX1P4M, max UDMA/100
ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA TOSHIBA MQ01ABD0 4M PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/699 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW SU-208FB TF01 PQ: 0 ANSI: 5
usb 2-6: New USB device found, idVendor=04f2, idProduct=b446
usb 2-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-6: Product: TOSHIBA Web Camera - HD
usb 2-6: Manufacturer: SunplusIT Inc
sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
tsc: Refined TSC clocksource calibration: 2593.995 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x256413873f2, max_idle_ns: 440795261455 ns
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
sd 0:0:0:0: [sda] Attached SCSI disk
input: HID 0581:0101 as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/0003:0581:0101.0001/input/input10
hid-generic 0003:0581:0101.0001: input,hidraw0: USB HID v1.10 Mouse [HID 0581:0101] on usb-0000:00:14.0-2/input0
psmouse serio2: synaptics: queried max coordinates: x [..5660], y [..4690]
psmouse serio2: synaptics: queried min coordinates: x [1366..], y [1298..]
psmouse serio2: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xf00123/0x840300/0x12e800/0x0, board id: 2989, fw id: 1717119
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input9
EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
clocksource: Switched to clocksource tsc
random: init: uninitialized urandom read (12 bytes read, 124 bits of entropy available)
random: nonblocking pool is initialized
init: plymouth-upstart-bridge main process (193) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (206) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (208) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (210) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (212) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (214) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (216) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (218) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (220) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (222) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (224) terminated with status 1
init: plymouth-upstart-bridge respawning too fast, stopped
Adding 8309756k swap on /dev/sda5. Priority:-1 extents:1 across:8309756k FS
systemd-udevd[328]: starting version 204
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
dw_dmac INTL9C60:00: DesignWare DMA Controller, 8 channels
toshiba_bluetooth: Toshiba ACPI Bluetooth device driver
wmi: Mapper loaded
toshiba_acpi: Toshiba Laptop ACPI Extras version 0.23
input: Toshiba input device as /devices/virtual/input/input13
toshiba_acpi: Supported laptop features: hotkeys touchpad usb-sleep-charge usb-rapid-charge special-function-keys panel-power-on
usb 2-5: new full-speed USB device number 4 using xhci_hcd
[drm] Initialized drm 1.1.0 20060810
usb 2-5: New USB device found, idVendor=8087, idProduct=07dc
usb 2-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Intel(R) Wireless WiFi driver for Linux
Copyright(c) 2003- 2015 Intel Corporation
[drm] Memory usable by graphics device = 2048M
checking generic (c0000000 410000) vs hw (c0000000 10000000)
fb: switching to inteldrmfb from VESA VGA
Console: switching to colour dummy device 80x25
[drm] Replacing VGA console driver
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input14
[drm] Initialized i915 1.6.0 20151010 for 0000:00:02.0 on minor 0
fbcon: inteldrmfb (fb0) is primary device
audit: type=1400 audit(1513637843.793:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=432 comm="apparmor_parser"
audit: type=1400 audit(1513637843.793:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=432 comm="apparmor_parser"
audit: type=1400 audit(1513637843.793:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=432 comm="apparmor_parser"
audit: type=1400 audit(1513637843.793:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=462 comm="apparmor_parser"
audit: type=1400 audit(1513637843.793:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=462 comm="apparmor_parser"
audit: type=1400 audit(1513637843.793:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=462 comm="apparmor_parser"
Bluetooth: Core ver 2.21
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
iwlwifi 0000:07:00.0: loaded firmware version 17.608620.0 op_mode iwlmvm
usbcore: registered new interface driver btusb
Bluetooth: hci0: read Intel version: 370710010002030d00
iwlwifi 0000:07:00.0: Detected Intel(R) Dual Band Wireless AC 3160, REV=0x164
iwlwifi 0000:07:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:07:00.0: L1 Enabled - LTR Enabled
[drm] amdgpu kernel modesetting enabled.
vga_switcheroo: detected switching method \_SB_.PCI0.GFX0.ATPX handle
Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.0.2.3.d.bseq
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this system
media: Linux media interface: v0.10
Linux video capture interface: v2.00
CRAT table not found
Finished initializing topology ret=0
kfd kfd: Initialized module
snd_hda_codec_conexant hdaudioC1D0: CX20756: BIOS auto-probing.
snd_hda_codec_conexant hdaudioC1D0: autoconfig for CX20756: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
snd_hda_codec_conexant hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_conexant hdaudioC1D0: hp_outs=1 (0x16/0x0/0x0/0x0/0x0)
snd_hda_codec_conexant hdaudioC1D0: mono: mono_out=0x0
snd_hda_codec_conexant hdaudioC1D0: inputs:
snd_hda_codec_conexant hdaudioC1D0: Internal Mic=0x1a
snd_hda_codec_conexant hdaudioC1D0: Mic=0x19
snd_hda_codec_conexant hdaudioC1D0: Enable sync_write for stable communication
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain uncore
intel_rapl: Found RAPL domain dram
intel_rapl: RAPL package 0 domain package locked by BIOS
intel_rapl: RAPL package 0 domain dram locked by BIOS
uvcvideo: Found UVC 1.00 device TOSHIBA Web Camera - HD (04f2:b446)
input: TOSHIBA Web Camera - HD as /devices/pci0000:00/0000:00:14.0/usb2/2-6/2-6:1.0/input/input17
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
Console: switching to colour frame buffer device 170x48
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
amdgpu 0000:09:00.0: enabling device (0000 -> 0003)
[drm] initializing kernel modesetting (TOPAZ 0x1002:0x6900 0x1179:0xF922 0x00).
[drm] register mmio base: 0xB3500000
[drm] register mmio size: 262144
[drm] doorbell mmio base: 0xB0000000
[drm] doorbell mmio size: 2097152
[drm] probing gen 2 caps for device 8086:9c18 = 5323c42/0
[drm] probing mlw for device 8086:9c18 = 5323c42
vga_switcheroo: enabled
ATPX version 1, functions 0x00000033
ATOM BIOS: Quanta/Toshiba
[drm] Changing default dispclk from 0Mhz to 600Mhz
input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input18
input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input19
input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input20
amdgpu 0000:09:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used)
amdgpu 0000:09:00.0: GTT: 2048M 0x0000000080000000 - 0x00000000FFFFFFFF
[drm] Detected VRAM RAM=2048M, BAR=256M
[drm] RAM width 64bits DDR
[TTM] Zone kernel: Available graphics memory: 4049278 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] amdgpu: 2048M of VRAM memory ready
[drm] amdgpu: 2048M of GTT memory ready.
[drm] GART: num cpu pages 524288, num gpu pages 524288
[drm] PCIE GART of 2048M enabled (table at 0x0000000000040000).
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
amdgpu 0000:09:00.0: amdgpu: using MSI.
[drm] amdgpu: irq initialized.
amdgpu 0000:09:00.0: fence driver on ring 0 use gpu addr 0x0000000080000010, cpu addr 0xffff88024aebd010
amdgpu 0000:09:00.0: fence driver on ring 1 use gpu addr 0x0000000080000020, cpu addr 0xffff88024aebd020
amdgpu 0000:09:00.0: fence driver on ring 2 use gpu addr 0x0000000080000030, cpu addr 0xffff88024aebd030
amdgpu 0000:09:00.0: fence driver on ring 3 use gpu addr 0x0000000080000040, cpu addr 0xffff88024aebd040
amdgpu 0000:09:00.0: fence driver on ring 4 use gpu addr 0x0000000080000050, cpu addr 0xffff88024aebd050
amdgpu 0000:09:00.0: fence driver on ring 5 use gpu addr 0x0000000080000060, cpu addr 0xffff88024aebd060
amdgpu 0000:09:00.0: fence driver on ring 6 use gpu addr 0x0000000080000070, cpu addr 0xffff88024aebd070
amdgpu 0000:09:00.0: fence driver on ring 7 use gpu addr 0x0000000080000080, cpu addr 0xffff88024aebd080
amdgpu 0000:09:00.0: fence driver on ring 8 use gpu addr 0x0000000080000090, cpu addr 0xffff88024aebd090
amdgpu 0000:09:00.0: fence driver on ring 9 use gpu addr 0x00000000800000a0, cpu addr 0xffff88024aebd0a0
amdgpu 0000:09:00.0: fence driver on ring 10 use gpu addr 0x00000000800000b0, cpu addr 0xffff88024aebd0b0
[drm] ring test on 0 succeeded in 15 usecs
[drm] ring test on 1 succeeded in 14 usecs
[drm] ring test on 2 succeeded in 15 usecs
[drm] ring test on 3 succeeded in 4 usecs
[drm] ring test on 4 succeeded in 2 usecs
[drm] ring test on 5 succeeded in 2 usecs
[drm] ring test on 6 succeeded in 2 usecs
[drm] ring test on 7 succeeded in 2 usecs
[drm] ring test on 8 succeeded in 2 usecs
[drm] ring test on 9 succeeded in 6 usecs
[drm] ring test on 10 succeeded in 6 usecs
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 1 succeeded in 0 usecs
[drm] ib test on ring 2 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 4 succeeded in 0 usecs
[drm] ib test on ring 5 succeeded in 0 usecs
[drm] ib test on ring 6 succeeded in 0 usecs
[drm] ib test on ring 7 succeeded in 0 usecs
[drm] ib test on ring 8 succeeded in 0 usecs
[drm] ib test on ring 9 succeeded in 0 usecs
[drm] ib test on ring 10 succeeded in 0 usecs
[drm] Initialized amdgpu 3.1.0 20150101 for 0000:09:00.0 on minor 1
EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
init: failsafe main process (782) killed by TERM signal
audit: type=1400 audit(1513637846.141:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=879 comm="apparmor_parser"
audit: type=1400 audit(1513637846.141:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=879 comm="apparmor_parser"
audit: type=1400 audit(1513637846.373:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=898 comm="apparmor_parser"
audit: type=1400 audit(1513637846.373:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=898 comm="apparmor_parser"
init: cups main process (880) killed by HUP signal
init: cups main process ended, respawning
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
vboxdrv: Found 4 processor cores
vboxdrv: TSC mode is Invariant, tentative frequency 2593993504 Hz
vboxdrv: Successfully loaded version 5.0.40 (interface 0x00240000)
VBoxNetFlt: Successfully started.
VBoxNetAdp: Successfully started.
VBoxPciLinuxInit
vboxpci: IOMMU not found (not registered)
iwlwifi 0000:07:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:07:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:07:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:07:00.0: L1 Enabled - LTR Enabled
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
r8169 0000:08:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
usb 2-5: USB disconnect, device number 4
audit_printk_skb: 57 callbacks suppressed
audit: type=1400 audit(1513637876.233:31): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2188 comm="apparmor_parser"
audit: type=1400 audit(1513637876.233:32): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2188 comm="apparmor_parser"
wlan0: authenticate with c4:a3:66:da:15:67
wlan0: send auth to c4:a3:66:da:15:67 (try 1/3)
wlan0: authenticated
wlan0: associate with c4:a3:66:da:15:67 (try 1/3)
wlan0: RX AssocResp from c4:a3:66:da:15:67 (capab=0x431 status=0 aid=5)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
cfg80211: Regulatory domain changed to country: ES
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm), (0 s)
cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
systemd-hostnamed[5309]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
perf interrupt took too long (2516 > 2500), lowering kernel.perf_event_max_sample_rate to 50000